Connect backup power to your home safely.

4-MIT-DRY-119 15kVA Split-Phase Step-Down Transformer, 480V or 240V to 120/240V, Transformer for Commercial or Residential Power

Need 120/240V from a 240V or 480V supply? The 4-MIT-DRY-119 is a 15kVA split-phase step-down transformer that converts either 240Vac or 480Vac to 120/240V for residential or commercial sites.

$2,008.00

Wattnode Wide-Range Modbus Meter with Accu-CT Split-Core CTs

Installers who need detailed energy data can use the WattNode Wide-Range Modbus meter (WND-WR-MB), which reports over fifty electrical measurements over a Modbus RTU RS-485 network. It works on 100 to 600 Vac services, single-phase or three-phase, wye or delta.

$414.00

Anker SOLIX

10-Circuit Manual Transfer Switch (120V/240V, 10-Circuit Transfer Switch + 30 Amp Cable, For F3800 Plus & 2× F3000)

This is a Pro/Tran 2 10-circuit 120/240V manual transfer switch from the Loadside range, listed for use with an Anker SOLIX F3800 Plus or two F3000 units. It lets homeowners route selected circuits to portable backup power.

$466.65

Anker SOLIX

10-Circuit Manual Transfer Switch(120V/240V, 50 Amp, For F3800, 2× F3800 Plus)

This 50-amp version of the Pro/Tran 2 10-circuit 120/240V manual transfer switch is listed for the Anker SOLIX F3800 or two F3800 Plus units. It is part of the Loadside range of manual transfer switches.

$509.15

Anker SOLIX

2× Anker SOLIX F3000 + 10-Circuit Manual Transfer Switch

Two Anker SOLIX F3000 power stations are paired here with a 10-circuit manual transfer switch for home backup. Each unit supports 3,600W pass-through charging from a 120V generator, so appliances keep running during outages.

$2,958.39

Anker SOLIX

2× Anker SOLIX F3000(UL9540 Certificated) + Power Saver Kit + Transfer Switch

This is the fullest F3000 bundle: two UL9540 certified Anker SOLIX F3000 units, a Power Saver Kit and a transfer switch. It is aimed at homeowners who want portable power wired into selected home circuits.

$3,061.59

Anker SOLIX

2× Anker SOLIX F3800 (7.68kWh | 12kW) + Smart Home Power Kit

Pairing two Anker SOLIX F3800 units (7.68kWh, 12kW combined) with a Smart Home Power Kit, this bundle ties the power stations into the utility grid and rooftop solar. It provides backup for essential home appliances during outages.

$3,919.99

Anker SOLIX

2× Anker SOLIX F3800 Plus + 10-Circuit Manual Transfer Switch

Here two Anker SOLIX F3800 Plus units come with a 10-circuit manual transfer switch. Each accepts up to 3,200W of solar input (dual 165V) and can fully charge in under 2 hours in optimal sunlight.

$4,123.49

Anker SOLIX

6-Circuit Manual Transfer Switch (120V, 30 Amp, For F3000, F2600, F2000)

For smaller Anker SOLIX setups, this 6-circuit, 30-amp Pro/Tran 2 manual transfer switch from the Loadside range works with the F3000, F2600 and F2000. It connects a portable power station to six chosen home circuits.

$359.99

Anker SOLIX

Anker SOLIX F2600 + 6-Circuit Manual Transfer Switch

This bundle pairs the Anker SOLIX F2600 power station with a 6-circuit manual transfer switch for homeowners who want to connect backup power to selected home circuits. The F2600 carries a 2,560Wh LFP battery with 2400W continuous AC output and a 2800W surge.

$1,359.19

Anker SOLIX

Anker SOLIX F3000(UL9540 Certificated) + 6-Circuit Manual Transfer Switch

Aimed at home backup, this bundle pairs the F3000 power station with a 6-circuit manual transfer switch. The station supports 3,600W full-speed pass-through charging, powering devices while it charges without shutting down.

$1,519.19

Anker SOLIX

Anker SOLIX F3000(UL9540 Certificated) + Power Saver Kit + Transfer Switch

Built for outages, this F3000 bundle adds a Power Saver Kit and a transfer switch. The station offers 3,600W pass-through charging, can recharge from a 120V generator and keeps appliances running when the grid goes down.

$1,622.39

Anker SOLIX

Anker SOLIX F3800 + Smart Home Power Kit

The Smart Home Power Kit in this bundle is paired with the F3800, a station that starts at 3.84kWh (6kW). It accepts up to 2,400W of solar charging through dual 60V inputs.

$2,319.99

Anker SOLIX

Anker SOLIX F3800 Plus + Smart Home Power Kit

With the Smart Home Power Kit included by name, this bundle connects the F3800 Plus to your home. The station accepts up to 3,200W of solar input and supports 240V bypass charging from a wall outlet.

$2,559.99

Anker SOLIX

Starter Home Backup Kit (120V/240V, 30 Amp, 6-Circuit Transfer Switch + Cable, For F3800)

A manual transfer switch is a common way to send portable power to selected home circuits. This starter kit pairs a Pro/Tran 2 30-amp, 6-circuit switch with a cable for use with the Anker SOLIX F3800.

$404.10

Aptos Solar

Aptos DTU-Pro WiFi Data Transfer Unit, 4G LTE, WiFi, and Ethernet Monitoring for Aptos MAC Microinverters up to 99 Panels

To see how each Aptos microinverter is performing, you need a data transfer unit. The DTU-Pro links the system to the Aptos monitoring server over the internet.

$347.54

BLUETTI

EMS

The BLUETTI EMS replaces the IOT module and lets two EP800 or EP900 units communicate when connected in parallel. It is for owners expanding to a two-unit system.

$269.10

BLUETTI

EMS for EnergyPro 13K

This energy management system (EMS) is designed for the BLUETTI EnergyPro 13K. It is intended for owners of that home energy system.

$269.10

BLUETTI

EP500 / EP500Pro / AC300 / AC500 Fusion Box

The Fusion Box connects two BLUETTI power stations to double the rated power, voltage or capacity, and the listing names the EP500, EP500Pro, AC300 and AC500.

$269.10

BLUETTI

EP900/EP800 Home Integration Kit

This home integration kit connects the BLUETTI EP900 energy storage system to a home's main panel. It is compatible with the EP900 and EP800.

$269.10

BLUETTI

Epad Central Control Screen

A central touchscreen for people who want one place to watch and run their power system. The BLUETTI Epad brings BLUETTI gear and compatible third-party devices onto a single colour display, which suits RV and marine setups that already use NMEA 2000 or RV-C.

$359.10

Briggs & Stratton

Briggs & Stratton Energy Trak Gateway With Outdoor Rated Enclosure

If you run a SimpliPHI energy storage system, the Briggs & Stratton EnergyTrak Gateway is the piece that lets you see what it is doing. It reports real-time battery data, sends fault alerts and links batteries, inverters and solar to the monitoring app.

$605.63

Cummins

Cummins RA200 SE 200-Amp Service Entrance Automatic Transfer Switch, 120/240V, NEMA 3R

Between a Cummins Quiet Connect RS series generator and your home sits this RA200 SE (RA212S3) automatic transfer switch. It is service entrance rated at 200A for 120/240V single-phase service, so it can act as the main disconnect.

$878.34

Duracell

Duracell Power Center Communication Gateway

This WiFi gateway is the central hub of a Duracell solar system, linking the microinverters to the monitoring platform. It suits homeowners and installers who want to see production and system health without walking out to the equipment.

$332.39

Duracell

Duracell Power Center Communication Gateway + Consumer Grade Meter + WiFi

Unlike the standalone gateway, this listing combines the Duracell Power Center communication gateway with a Consumer Grade Meter (CGM) and WiFi in one weather-resistant enclosure. It is built for Duracell energy storage systems where accurate whole-home consumption metering is needed.

$627.84

Eaton

Eaton BR Series 100 Amp 24-Circuit Main Breaker Outdoor Plug on Neutral Load Center Contractor Breaker Kit

For outdoor service work, Eaton's BR series 100 amp load center pairs a NEMA 3R enclosure with plug-on neutral design. This contractor kit suits new construction, service upgrades, and outdoor electrical projects.

$180.36

ECO-WORTHY

ECO-WORTHY 48V 60A Battery Charger with 3.2kW Maximum Output, 48V Battery Charger, Works with 120V or 120/240V Generator Input, NEMA L14-30P Plug

When solar is low or the grid is down, this 48V 60A charger uses grid or generator power to keep a battery bank charged. It is designed for lithium batteries but works with most common chemistries, and it plugs in through a NEMA L14-30P connector.

$305.10

EcoFlow

EcoFlow DELTA Pro Ultra X Smart Transfer Kit

With a Smart Gateway that manages six heavy-load circuits, the DELTA Pro Ultra X Smart Transfer Kit brings battery backup into your home's electrical system. It is intended for homeowners who want to run large appliances, even a 5-ton AC, during outages.

$7,424.25

EcoFlow

EcoFlow DELTA Pro*2 + Double Voltage Hub + Transfer Switch

Two EcoFlow DELTA Pro units are grouped here with a Double Voltage Hub and a Transfer Switch for home backup. The setup suits homeowners who want more output and capacity than a single DELTA Pro provides.

$3,279.20

EcoFlow

EcoFlow Home Backup Kit: Transfer Switch

Keeping critical home circuits running during a blackout is the job of this EcoFlow transfer switch kit. It works with one DELTA Pro 3, one DELTA Pro Ultra, or two DELTA Pro units, and must be fitted by a qualified electrician.

$359.10

EcoFlow

EcoFlow PowerInsight 2 (Recommended Accessories)

PowerInsight 2 is an 11-inch touch screen that shows your home's energy flow in real time. It is for EcoFlow owners who want one screen to manage several devices.

$359.10

EcoFlow

EcoFlow PowerInsight Home Energy Manager (Recommend Accessory)

With a 10-inch touchscreen, the PowerInsight Home Energy Manager tracks your home energy data by day, month, and year. It is designed for homeowners who want to see and control energy use in one place.

$278.10

EcoFlow

EcoFlow Smart Gateway (200A) (Recommended Accessories)

The EcoFlow Smart Gateway (200A) manages up to 6 controlled circuits during backup. It automatically sheds non-essential loads and switches over in under 20 ms.

$1,599.20

EcoFlow

EcoFlow Smart Home Panel 2

The Smart Home Panel 2 is an intelligent subpanel for EcoFlow home battery systems, with a 20 ms automatic switchover. It must be installed before use.

$1,199.20

EcoFlow

EcoFlow Smart Inlet Box (Smart Home Panel 2 Upgrade）

EcoFlow's Smart Inlet Box provides up to 150A of total load through three 50A interfaces. It supports bidirectional power and switches between grid, battery, and generator sources.

$449.10

EcoFlow

Transfer Switch 306A - 125/250v with 30A (Pairing with 1 × EcoFlow DELTA Pro Ultra)

This pre-wired transfer switch is designed to pair with one EcoFlow DELTA Pro Ultra. It prevents back-feeding and comes in an indoor-ready metal cabinet with an L14-30 power inlet.

$359.10

EcoFlow

Whole-Home Backup Kit: EcoFlow Smart Control Kit

This EcoFlow kit centres on the Double Voltage Hub, which pairs two DELTA Pro units for 7200W and 240V output to a home's circuits. It is aimed at households replacing a gas generator with quiet battery backup.

$3,119.20

EG4

EG4 | Chargeverter Plus

When solar production drops, a generator can keep the battery bank topped up. The EG4 Chargeverter Plus is an AC-to-DC charger that sits between the generator and a 48V lithium bank, regulating incoming power.

$531.24

EG4

EG4 Electronics Chargeverter Plus, 48V 100A Outdoor Rated Lithium Battery Charger, 120/208/240Vac Input, IP54

Rated IP54 for sheltered outdoor use, the EG4 Chargeverter Plus is a 48V, 100A battery charger that accepts 120, 208, or 240Vac. It outputs up to 5.12kW at 240Vac for on-grid and off-grid storage systems.

$531.24

EG4

EG4 Electronics Chargeverter-GC 48V 100A Battery Charger for LiFePO4 Batteries, 240V or 120V Input with AGS and Built-in Breaker

Bypassing the inverter entirely, the EG4 Chargeverter-GC converts AC from a generator or grid connection straight into DC for a 48V LiFePO4 bank. It delivers up to 100A of charging current and includes AGS and a built-in breaker.

$450.49

EG4

EG4 GridBOSS Microgrid Interconnect Device (MID), Critical and Non-Critical Loads Ports with Smart Loads and Remote Monitoring, 200A Grid Bypass

A microgrid interconnect device acts as the central hub of a solar and storage system. The EG4 GridBOSS connects grid power, hybrid inverters, generators, and smart loads, with a 200A transfer switch.

$1,439.99

EG4

EG4 GridBOSS MID v3.1 | 200A Service Entrance

Combining several components into one unit, the EG4 GridBOSS MID v3.1 is a 200A microgrid interconnect device for solar and backup installations. It connects up to three hybrid inverters and a generator.

$1,439.99

EMP Shield

EMP Home & Lightning Shield | 120/240V

Mounted at the breaker box, the EMP Home & Lightning Shield protects a 120/240V home electrical system from lightning, solar flares, power surges, and electromagnetic pulse. The manufacturer describes it as one of the fastest whole home surge protectors, operating in less than 1 billionth of a second.

$359.10

EMP Shield

EMP Shield Home EMP & Lightning Protection + CME Defense Concealed Model

The concealed model of EMP Shield's home protector covers an entire home electrical system against electromagnetic pulse, lightning, solar flares, and power surges. It operates in less than a billionth of a second.

$368.10

EMP Shield

EMP Shield Whole Home Generator EMP Shielding & Lightning Protection

Home generators get their own EMP Shield model, built to protect against EMP, lightning, solar flares, and power surges. It operates in less than a billionth of a second.

$350.10

Enphase

Enphase IQ Combiner 5

Interconnection equipment for an Enphase system is consolidated into one pre-wired enclosure with the IQ Combiner 5. It works with IQ Series Microinverters, IQ System Controller 3/3G, and IQ Battery 5P for residential applications.

$603.50

Enphase

Enphase IQ Gateway

Production and consumption data from an Enphase IQ System reaches the Enphase Installer Platform through the IQ Gateway, allowing remote maintenance and management. It includes revenue-grade PV production metering and works with the Enphase IQ Battery.

$493.00

Enphase

Enphase IQ Load Controller

This is the Enphase IQ Load Controller. Paired with the IQ System Controller, it controls up to two 240 VAC loads or sheds up to two solar circuits when the Enphase Energy System runs off-grid.

$404.10